Popular Design of Wooden Deck Tiles

0

Wooden deck tiles – Tiling of an outdoor wooden deck is a way to make the environment more interesting than a regular deck while the surface takes longer. The tiling process is similar to an indoor floor tiling, with the exception of the preparation of the surface. Lay a strip of membrane separation along an edge of the deck, from beginning to end. Cut it at the end with a razor blade to pass. Enter your pencil along the outer edge of the membrane, detection on the deck where it placed. Pull the diaphragm side. Spread tile mortar on the traced area with a trowel, which is the entire span of the pencil mark on the edge of the deck. Place the diaphragm back down and press it firmly into the mortar.

Ideas of wooden deck tiles, lie out, cut and mortar along the next stretch membrane, bumping against the first. Repeat that the entire deck membrane. Leave it for 12 hours in the mortar. Use a chalk snap line to two intersecting lines lay across the membrane-covered floor, form four equal squares that meet in the center. With the toothed trowel mortar spread over the middle of the floor, on top of the membrane and over the lines. The lines are still visible through the membrane.

RELATED:   Popular Choice of Stone Deck Tiles

Wooden deck tiles Press place in the middle of the floor. Suppose a second tile next to it, whereby a space between them. Repeat, building up from the middle along the lines, the timing of the entire surface. Cutting to adapt the tile at the ends on a tile cutter. Allow the set of tiles in the mortar for 12 hours. Spread spoil over to force the plate surface with a joint, with the aid of the long side of the float to the grout in the lines between the tiles. Use a damp sponge to wipe the excess grout. Leave for 48 hours to walk.

Comments are closed.